Making hammocks with your own hands is the most popular hammock design. To better and more clearly show how to make a hammock with your own hands, we suggest that you consider several design options for this product. This will be the most successful choice that will meet your preferences and capabilities. There are several options below.
Types of hammocks and their features
Interestingly, the lounger showed up among the Indians of the Caribbean Sea. Since it was difficult to rest on the ground, venturesome locals concocted such a gadget as a lounger.
Seeing a particularly agreeable and safe bed, the Spaniards quickly embraced it, and later they were at that point utilized by many individuals from various nations. Obviously, over the long run, the lounger has been essentially adjusted and altered, and presently we can pick any plan of the lounger at our attentiveness: made of texture, texture, wood, and so forth.
To start with, it won’t be pointless to tell about what loungers are, and what are the components of the gadget of these gadgets for diversion. There are just two fundamental sorts of loungers.
A wicker lounger is a net-like fishing net, made of a thick and solid rope or rope. In the primary case, two-string weaving can be utilized, and the measurement of each vein ought to be around 3 cm. The cells have the state of a jewel aside from 5 to 10 cm. The length and width of the lounger can be unique and are chosen to rely upon your own inclinations. At the closures of the material, there are essentially supports that stretch the organization, and every one of the finishes of the strings is gathered in a group, on which there is some sort of affixing gadget.
There are additional texture loungers. They are additionally called Mexican covers. They are sewn from a thick and sturdy piece of material, like a covering or material. The far edges structure a saddle, to which a mounting ring or snare is fixed.
The Brazilian hammock for sitting is a reduced and simplified design that is attached to a trapezoidal suspension. Such a suspended chair can be made of a semi-rigid structure or completely rigid. That is, the hammock chair can be completely woven from natural or artificial rattan.
Making hammocks with your own hands: advantages and disadvantages of fabric and mesh
Despite the plan and kind of lounger, you need to know some broad guidelines that will assist you with making an agreeable and tough item.
Regardless you decide on a lounger (texture or rope), you ought not to live on modest manufactured materials. Assuming we talk about what is better: texture or lattice rope texture, everything relies upon the inclinations of the proprietors of this plan.
The texture is thicker and less breathable, so even in the cool climate, it will be agreeable and comfortable in such a lounger. The lattice is great for a warm and tiring summer. A wicker lounger, blown from all sides even with a powerless light wind, will make an awesome bed for unwinding.
On the off chance that we talk about the intricacy of making a lounger made of texture, then, at that point, it will be a lot simpler and quicker to make it than to weave a fishing net yourself or study the macrame strategy. In this way, you can just purchase an instant strong lattice, which will fill in as the reason for making a rope lounger.
Regardless you decide on a lounger (texture or rope), you ought not to live on modestly engineered materials. In the event that we talk about what is better: texture or cross-section rope texture, everything relies upon the inclinations of the proprietors of this plan.
The texture is thicker, not so great, so even in a cool climate, it will be agreeable and comfortable in such a lounger. The cross-section is great for a sweltering and tiring summer. A wicker lounger, blown from all sides even with a feeble light wind, will make a brilliant bed for unwinding.
In the event that we talk about the intricacy of making a lounger made of texture, then, at that point, it will be a lot simpler and quicker to make it than to weave a fishing net yourself or study the macrame strategy. Along these lines, you can basically purchase an instant strong cross-section, which will fill in as the reason for making a rope lounger.
Hammock with your own hand drawings and diagrams
We sew a lounger from a texture estimated 3×2, 2 meters. To do this, we will require a solid sleeping pad with wheels, calico, or cover. The lounger was agreeable and extensive, intended for a grown-up (human). That is the reason we utilize the full width of the texture.
We utilize wooden parts as the casing of the lounger. It is ideal to purchase a piece of fabric with a length of 3.6 meters, yet you can take two pieces with a length of 1.4 meters and simply sew them. In case you are making material, it ought to be borne as a main priority that it will be undeniably challenging to sew a particular material on a traditional sewing machine.
Calculation of materials and tools for work
We need certain materials and tools to make different versions of a hammock from fabric.
Fabric hammock on the crossbar
durable fabric — 3 x 2.2 m;
Sintepon — 50 cm;
Temblak — 5, 2×3 cm;
nylon corrugation-4 mm cross-section;
wooden beam – section 4 mm;
chalk for marking fabrics;
basting and normal needles;
Pressed parts are thinner, and easier to sew, and there is no need to hold the fabric with your hand.
Stages of hammock production
We draw two rectangles with dimensions of 1.5 x 2 meters from the raw side of the material. Cut out the patterns and put them together.
Offset 1.5-2 cm from the edge and stitch with short sides of the fabric on both sides. The rotation of the object is there. The lower part will serve as the back, and the upper part will serve as the face. Ironing facilities on one side.
I sew the seam on the long part with an indentation of 5 cm at the edges, the back of the sling fits along the entire length, and the front is 35 cm from the seam. Then we wrap the lower part of the workpiece from the top, without cutting the line.
Slings are used to determine the shape of the hammock
Prepare 4 pieces of slings with a length of 70 cm and sew them to certain attachment points facing back. We wrap the edges to create transverse holes.
We stretch the long side sides of the product to the front side with a step of 30 cm from the edge. Cut out strips of Sintepon 25×125 cm and insert them into the prepared pockets. Then we turn, wash, and stretch the edges so that we can make the original rolls on the sides of the hammock from the long sides. To secure the Sintepon well, we sew the pockets in a quilted way in several places.
The wooden beam is cut into two equal parts. We mark about 2 cm from the two edges and make a notch about 1 cm in size. Remove the chisel with a chisel. We clean the abrasive paper and paint the rods with acrylic paint. Leave it to dry.
We deviate 5 cm from the two ends of the product and sew the cords to place the crossbars in them. After placing the lattices, we evenly place the base of the hammock on them.
Connect the nylon truss with two crossbars so that the nodes are in the grooves.
Hammock fabric on the sleeve
You can make a slightly different modification of the fabric hammock on the sleeve with wooden stands.
Materials and tools:
durable material — 2.7-3 m;
guides — 22 pcs .;
Rope length of 35 m, a diameter of 6 mm;
large metal rings;
electric drill and drill bit 12 mm;
bars 30×50 — their length should correspond to the width of the hammock;
chalk for marking fabrics;
Making hammocks with your own hands
Measure a piece of cloth and cut 2.7 meters. Bend the edges by about 6 cm and sew on a typewriter. Then iron them, bend them again, and stitch
The edges of the fabric are hidden by 2 cm and sewn on a typewriter.
Mark with chalk on the fabric along the entire width of the bushing attachment points with the same stroke. We will have 11 pieces on each side.
To attach the guides to the fabric, you will need a special tool.
In the marketplaces, we cut out small holes and fix the guides in them with a special tool. Our canvas hammock is ready.
The ears are inserted and fixed along the entire length.
As supports, we take 2 rods with drilled holes at the same distance as the through-holes of the hammer. They prevent the fabric from folding under the weight of people.
The crossbar will prevent stretching and sagging of the fabric
Pull the ropes through the holes.
Each of the cut pieces of the string passes through the hole. We perform this procedure on both sides of the hammock.
We are mounting a hanging hammock. To do this, we create a special frame. But you can’t do that. To do this, we attach a metal ring to the hook, put the hammock on the floor, and fix it with a heavy press.
Anyone can make a hammock
We polish all the wooden design elements and then cover them with an antiseptic. Then they can be varnished or painted.
Hammock swing with your own hands
Such a small hammock for sitting can be easily made from a piece of material and a metal wrap for children (a hoop).
Materials and tools:
durable fabric — 3×1. 5 m;
Rim with a diameter of 90 cm;
Sintepon — 3×1. 5 m;
strong reps tape — 8 m;
If the suspended chair is located on the veranda or in the gazebo, you will need a suspended structure.
We have a comfortable and small hammock that does not require several supports.
Fabric hammock: a master class with photos
Tools and materials for creating with your own hands
To make a hammock out of fabric, you will need:
two pieces of thick fabric (2 × 0.9 and 2.12 × 0.9 m);
two narrow strips of material (0.9 × 0.13 m);
20 fabric rectangles (0.18 × 0.11 m);
clothesline (40 m);
two wooden slats (0.90 m each);
All materials for making hanging loungers can be found in any home improvement shop, their cost is low.
Spot the primary imprint with a pencil a good ways off of 2.5 cm from the edge. Spot the accompanying characters with a time frame of cm. There ought to be 10 of them altogether. Check the exactness of the markers: the second, similar to the first, ought to be a ways off of 2.5 cm from the edge. The openings permit them to go unreservedly through the collapsed line.
The location of the plank is an important step in creating a hammock, so accuracy is needed here.
Drill the holes.
It is more convenient to drill holes in the rail with a small drill
Make circles from arranged texture square shapes: overlay the edges a good ways off of 0.5 cm so the material doesn’t disintegrate and isn’t sewn.
The folded edge in front of the line is pressed and attached.
Take a fabric with dimensions of 2.12 x 0.9 m.
Fold the narrow edge on each side, first by 1 cm, then by the second 5. Sew along the lower edge of the fold.
Place the pre-made loops on both sides, respectively, the marking on the rail: the center of each loop should coincide with the hole. Sew seams and embroidery for strength.
Fold both sides of the fabric facing each other and sew both long edges, retreating about 1 cm. The resulting fabric is preferably pressed to smooth the seams.
Each narrow strip of material should be bent in half, the wrong side, pressed and sewn on three sides, retreating from the edge by 0.5 cm, leaving one edge without tension. Remove the tapes and iron them. Wrap the unbound edges inside, and sew.
Sew the finished ribbons along the edge of the canvas next to the loop — this will give the product additional strength. The fastening tape is necessary around the entire perimeter.
The tape must first be connected, and it will continue in one canvas
Connect the canvas accessories and the slats with a rope.
The cord is stretched through the holes in the rail, gradually connecting it to the fabric of the hammock.
Make sure that the rope is evenly stretched, converging at the suspension point at a distance of 80-90 cm from the rail.
If the cord is not centered, the hammock will be unstable
In the resulting loops, thread the cord and fasten it, including the saddle of the rope loop, on the rope.
A braided loop will strengthen it
Choosing a place for a hammock
If you plan to install a hammock in the country, then the place for it is chosen to take into account such recommendations:
it is smarter to offer inclination to a not very radiant and blustery region. On the off chance that the lounger has a shelter, you can pick a radiant spot, for instance, close to the pool. It is beneficial that the surface under the lounger doesn’t transform into dust during a dry spell or into mud during the blustery season. The most ideal choice is a grass or a jungle gym covered with clearing stones;
trees with a breadth of no less than 15 cm are picked as supports for hanging loungers, it is smarter to utilize exceptional latches so as not to harm their bark. As another option, metal posts of a similar measurement are reasonable, they are covered in the ground to a profundity of 40-60 cm and cemented, and they can be improved remotely with a hemp rope. From the help to the start of the web ought to be 15-20 cm to guarantee security and the capacity to change the strain of the slings;
the optimal height of the hammock attachment is 150-170 cm;
the children’s hammock is positioned so that it can be seen from almost all corners of the site;
With respect to the effect on well-being, specialists don’t offer an unambiguous response here. From one viewpoint, it isn’t prescribed to rest in a lounger for quite a while, as this can hurt the neck and spine. Then again, assuming the material is solid and thick, it has braces, such a rest is even valuable and assists with adapting to a sleeping disorder.