The best brick wall with your own is appropriate in any house, apartment, or country cottage. This is an excellent solution for a modern kitchen. There, the brick will not only decorate the interior. It will perform a practical function. The imitation is often laid out in the area of the apron, covered with transparent glass. This apron will reliably protect the wall from dirt, it looks very unusual.
In the living room, imitation brickwork will be the main decorative accent. It will be combined with a fireplace and white upholstered furniture. Also, this idea will find its application in the bedroom interior. It is usually embodied in a brutal male interior
This decorative element is not suitable for every style of living space. The most suitable directions are discussed in the table:
The decorative design of the premises is made in many ways. If we consider the cheapest and most affordable technologies in terms of self-implementation, then one of the simplest and cheapest is the imitation of brickwork.
This design option is applicable to almost any building, regardless of the material of the walls. How to do it with your own hands, without the involvement of assistants, and even more so specialists, we will understand in this article.
Brickwork can be real or imitation, created from other materials. Moreover, there are many ways to make a brick wall with your own hands, and their choice depends on both financial capabilities and the initial state of the finished surface, and the desire or unwillingness of the owners to get involved with dirty and time-consuming work.
Thanks to the many options for solving this problem, it is feasible to even with a modest budget and minimal experience in the field of repair.
This method is ideal for those who are just building a house or have not yet started finishing. It is enough to leave one wall unpainted or build a brick partition, choosing the appropriate type: white silicate, red ceramic,
or colored hyper-pressed. The idea of the future interior also depends on whether it will be a clumsy ordinary brick or a smooth front one.
In an already inhabited house, this option is also possible, provided that the ceiling will withstand the weight of the masonry, and the area of the room will not suffer much from its volume. It has its advantages: this is an improvement in heat and sound insulation due to the duplicate wall.
In an already inhabited house, this option is also possible, provided that the ceiling will withstand the weight of the masonry, and the area of the room will not suffer much from its volume. It has its advantages: this is an improvement in heat and sound insulation due to the duplicate wall.
If the walls in the house are brick, and there is not much money for repairs, you can simply remove the decorative coating from them and clean the plaster. This will save you from unnecessary expenses and thinking about how to make a brick wall with your own hands, without having the experience of a bricklayer. But it will take a lot of time and effort since the process is time-consuming and dirty.
The plaster is opened with hand or power tools, then the remains are cleaned off with a grinder. A huge amount of dust is formed in this case. And so that the wall does not dust later, it is primed or varnished.
It should be remembered that when removing the plaster from the exterior walls, their thermal insulation characteristics seriously deteriorate.
This option is not easy to call, since the walls under the cladding need to be leveled and primed, and to perform the cladding so that it is firmly held and looks neat, not everyone can do it.
As for the cost of such finishing and the appearance of the finished surface, they depend on the selected material.
Artificial stone “under the brick”. Its cost, appearance, and characteristics depend on the base material. This can be cement, gypsum, or composite materials with the addition of sand, stone chips, coloring pigments, and other fillers.
The tile is glued to the tile adhesive with subsequent grouting of the joints.
Advice! When choosing an artificial stone, pay attention to the recommendations for use. For example, gypsum products can not be used in wet rooms.
The idea of a brick wall and how to imitate a brick on the wall with your own hands is as similar as possible to natural masonry, and not spend a fortune at the same time, you can make “bricks” yourself. You can take a variety of materials.
For example, the most popular and cheapest is styrofoam. It is easy to cut with a sharp knife, and just as easy to stick and paint. It costs a penny.
But this material has a significant drawback: it is very fragile, fragile, and poorly resists mechanical influences.
You can also cut rectangular parts according to the size of the brick from other materials – wood, foam concrete, and gas silicate blocks. Or make them from gypsum or cement mortar, pouring them into special molds that you can buy or make with your own hands.
After gluing the tiles, the joints between them are filled with silicone sealant using a mounting gun. Or a solution made from tile glue or any dry plaster mixture. It is laid out in a plastic bag and gently squeezed into the seams through the cut corner.
Another, not the most expensive, but quite time-consuming option to simulate brickwork. Moreover, there are several ways to make a brick wall in the interior with your own hands from plaster.
But each of them increases the noise insulation and heat capacity of the walls and allows you to create a surface very similar to real masonry. In this case, the wall does not have to be leveled before finishing.
The texture of the surface will depend on the grain size of the solution and the evenness of its application. To create the effect of old masonry, plaster is deliberately applied roughly, sometimes just by hand or giving a rough relief with various devices.
A very original texture can be obtained if the fresh plaster is sprinkled with sand and lightly rolled with a rubber roller.
And vice versa: if you need to get a smooth surface, the solution is immediately applied as carefully as possible, and after drying, sanded and sanded.
The same technology is used in the case of a stencil made of masking tape. Only instead of plaster, paint is applied to the wall. And each “brick” can be painted in different colors.
Perhaps the fastest and most accessible for self-execution. But not the most realistic. Textured wallpaper with a pattern of brickwork is pasted on the selected section of the wall. They can be replaced with wallpaper or self-adhesive film.
A flat tile made of expanded polystyrene without a pattern is suitable for false bricks. For our purposes, you can use any of its sides. The optimal size of the “stone” is 7/15 cm. If you increase the proportions, the wall will look unnatural. The process of making “stones” is simple: we squeeze them out of the ceiling tiles.
First, we will apply a marking on the styrofoam with allowances for seams. Next, we push through smooth lines, after which we cut out the “bricks” with a paint knife. We paste the finished products with our own hands-on the desired part of the wall.
As a binder, we use glue for ceramic tiles. There is no need to fill the seams with plaster. The gaps between the “stones” should be made very small: 1-1. 5 mm.
After finishing the sticker work, the bricks need to be painted. We try to apply as much paint as possible in the gaps, thereby creating an imitation of brickwork.
To get a more natural shade, you should mix two types of ochre: light and red. Then add a small amount of white paint to them. To make the texture of the brickwork look like a real one, we use the tampon technique for applying paints.
We take a sponge and begin to apply a thick mixture prepared in advance to the wall. After that, you will need a liquid paint shade “burnt bone”. We spray it on the bricks with a regular toothbrush.
To make the decor look even more natural, each row is painted in a special way.
The second can be given shade with the help of Mars, diluted with water.
For the third – use sienna and whitewash. All paints are applied using the same tampon method. Then continue to alternate shades in the same order. Upon completion of the work, it is recommended to cover the wall with varnish in two layers.
If you want a matte surface, lightly walk with fine sandpaper.
Based on the way in which the master decided to create brickwork, the necessary tools are prepared. Below is a complete list of tools and consumables that every master should have at hand with any method:
Before processing, the surface must be carefully prepared. The strength and durability of the finish will depend on the quality of the base. Preparation is divided into a number of operations:
On the off chance that the leveling layer is thick, it ought to be supported with a building-up network. The framework is connected to the guides so that it is roughly in the center of the layer thickness. For this situation, it will hold the arrangement in the most ideal manner.
The paste is added to the preliminary and applied with a roller. It is smarter to paint the creases and joints with a limited brush. In the event that the house is recently fabricated, it is smarter to stand by one year prior to applying the mortar. During this time, the pattern of occasional changes in the dirt and the characteristic dregs of building constructions will pass. This will decrease the danger of breaks in the mortar.
The best review of the living room 2023 your living room with a burst of…
What is the Scandinavian style? True to its name, Scandinavian Decor originated and flourished within…
What is a vertical green wall? A Vertical Garden Wall, also known as a living…
living room and bedroom Mix and match patterns: Try combining different patterns and textures for…
Stovetop in island pros and cons. It can be a lot of fun to design…
Decorations for your home for Easter As the first blooms and buds of spring appear…